Sata Port On Motherboard Not Working

November 10, 2021

Sata Port On Motherboard Not Working

There are options on the bios (basic input output system) or the cmos (complementary metal oxide semi conductor) set up to enable and disable sata functionality. Please replace with a good sata cable without problem.

SATA 1 to 5 Hard Disk Adapter Card Motherboard SATA Port

7) now do the same for sata cable and sata connector on sata.

Sata port on motherboard not working. Its weird, sometimes they will work, sometimes the same sata port wont work, or a hdd partition will go missing. Ports 1,3,5,6 all show not present on the main page of bios setup. I simply don't know if it's common for a sata port to go bad but the rest of the pc to be fine.

It appears the motherboard is detecting the hard drive looking at your video just fine so not sure why you initially state it is recognising it. Question problem with ports working selectively with certain. Do not reuse the used end, and only use one end with each port.

It definitely seems to be the issue since i swapped over the data cables and both drives only work with one sata port, i tried different data cables too and it works. 6) move on to the next sata ports until the completion of this task. 1 to 5 sata port multiplier.

Wasn't planning on upgrading for a couple more years since my combination of an i7 4790k, 16gb ddr3 ram, and a 1660 super can still run anything i'm interested in with mid settings if not higher Sata or the serial advance technology attachment is the current technology used for today. I'm aware that they will not work with an m.2 device connected but i do not have an m.2 device connected.

Legacy/ide, achi/sata, or raid mode. Tomahawk max sata 5 and 6 not working since bios e7c02ams.310. I tried clear cmos, enabling/disabling hot plug, enabling/disabling the port, different drive/cable, still nothing.

Ports 2 and 4 show drives connected and are functioning. I've had issues with the motherbaord not registering the 3/4/5/6 sata ports recently. Disconnect sata card, gpu card, reset cmos, connect gpu card in top blue port, connect sata pci to bottom blue port without any drives connected to it, setup bios and raid and boot priority, boot to windows, install marvell utility and drivers from the latest download.

Question usb ports won't work before windows boots up: Even switching from the sata 2 to sata 3 controller can result in such a boot loop. Question keyboard and mouse is not working on startup and bios:

Question ethernet port not working after unplugging then replugging: The revision will be printed on the actual motherboard, but as you said it doesn't sound promising. When installing the new m.2 drive the sata ports on the motherboard stopped working except for one port on the board.

The issue here is that downstream bandwidth from a single sata port is not shared effectively and can present a lot of bottlenecks for the connected drives. I have reflashed all the bios versions and this is the result. Sata mode is set to ide mode.

Question dram and boot light is on, usb ports won't work: Essentially, this device takes one sata port and multiplies it into several more. 1 of the drives is data and programs only and is not bootable, the other is set to boot.

Pci sata card not detected no matter what. The only sata splitters i have seen are for power only, not data, it appears it is one device per sata port. One of the cheapest ways to increase the amount of sata ports you have is to use the sata port multiplier.

So, i went to plug in a second drive, and it doesn’t seems to work or recognise it. Please try to connect hard disk or ssd to anther sata port of the motherboard. Ihad it out of the box and ran into the issue straight away.

Feb 2, 2018 @ 11:13am. Hey guys so my sata ports on my motherboard are not working after installing another m.2 drive on to my motherboard. Sata port not working on motherboard.

Very possible for not all of the conductors in the sockets on the motherboard are working as designed. Sata port 5 and 6 hasn't been working for me on msi b450 tomahawx max since bios version e7c02ams.310. Please replace with another power supply, and confirm whether the sata cable of the power.

Question motherboard ports not working: Please try another sata port of the power supply. Hi all today i got my new sshd i went to install it but is not recognised in any of the sata port.

There's also the conductors on the motherboard itself and the controller for the sata ports. On my computer i currently have 4 hard drives; Two m.2 drives and two ssd drives.

5) dip the cotton stick into sata port (the side with golden finger), and move the cotton stick sideways a few times to clean the sata port. According to the manual when the m2 port is used the sata port 1 is disabled in this case i should have 5 ports free but none of them is working, i have defaulted the setting in the bios but the remain inactive. Rest of the system seems fine.

Confirm sata cable or power cable is correctly connected. Since most atx/sata power supplies have two or more plugs on each leg that pretty much rules out a problem there if either plug works. A repair install or best yet a complete format and install of windows will fix that.

ASUS PRIME X299DELUXE. Basée sur le jeu de composants